Fiber cement is the most technically demanding residential cladding to install correctly — and the most rewarding when done right. It's fire-resistant to Class A, dimensionally stable across temperature extremes, impervious to moisture-driven rot, and resistant to insect damage. The 30-year material warranty is only in force when the installation meets manufacturer specifications precisely. Our Columbus, OH crews are James Hardie Preferred Contractors and hold equivalent certifications on other major fiber cement platforms.

Not every crew offering Fiber Cement Siding in Columbus, OH has the credentials and documented track record to back the claim. Here's what separates our team from the field.
Preferred Contractor status means your 30-year material warranty is fully in force. We submit the installation documentation to the manufacturer at project completion.
Every field cut is back-primed with alkyd primer within 30 minutes of cutting — not at end of day. Unprimed cut edges are the most common moisture entry point on fiber cement installations.
Nail type, length, spacing, and penetration depth are logged per manufacturer requirements and included in your close-out package — documentation that supports warranty claims.
All cutting is done at a designated outdoor station away from HVAC intakes. Crews wear P100 respirators. We follow OSHA silica exposure guidelines on every project.
We don't farm out subservice work. Every Fiber Cement Siding project in Columbus, OH is assigned to a technician with documented experience on that specific scope.
Smooth, wood-grain, and rough-sawn HardiePlank profiles installed to James Hardie's prescriptive requirements: correct clearances to grade and roofing, approved fastener type and schedule, required joint flashing at horizontal butt joints, and all field cuts back-primed.

Large-format vertical panels require correctly located blocking behind every vertical seam and Z-flashing at all horizontal transitions. We spec and install the blocking schedule before any panels go on.

Individual shingle panels are fastened at the exact nailhead position specified by the manufacturer and backed with secondary water-resistive layer at every course break. Gable ends and dormers done correctly look nothing like budget shake.

Factory-applied ColorPlus finish carries its own warranty and lasts significantly longer than field paint when installed by a Preferred Contractor. We handle factory-painted material carefully — no face nailing, correct storage before install, edge sealing at every field cut.

Complete tear-off, substrate repair, housewrap replacement, and new fiber cement system. Silica cutting controls in place throughout. Full fastener documentation produced at project close.

HardieTrim resists the moisture-driven cupping and rot that eventually afflicts wood trim at ground level and roof junctions. Integrated with wall panels at required grade clearance and back-primed at every cut.

Our Columbus, OH team follows the same documented process on every project — so you know what to expect at every stage.
We evaluate substrate flatness, existing moisture content, wall height, and sun exposure to specify the correct panel thickness, fastener schedule, and trim system for your Columbus, OH property.
Fiber cement is ordered by exact linear footage with waste factor. Material is stored flat under cover on-site — standing panels on edge before installation creates stress fractures at butt joints.
Field cutting is done at a dedicated outdoor cutting station with dust controls active. All cut edges are back-primed with alkyd primer within 30 minutes of cutting before any panel is carried to the wall.
Completed fastener log submitted to manufacturer at project close. Material warranty registered in your name under the Preferred Contractor program. Full close-out package delivered at final walkthrough.
The back-priming process was something I'd never seen on a fiber cement install. The installer showed me why it matters — and four years later, the paint on every panel face is still factory-perfect. That discipline at installation determines the outcome at year 10 and 20.
We chose HardiePlank for the fire resistance rating and the 30-year warranty. Forge Siding handled the Preferred Contractor registration, so the full material warranty is in force. Other quotes were cheaper — none included a certified installer.
Fastener log in the close-out package was something I didn't know to ask for. When the manufacturer warranty question comes up at resale, that documentation is going to matter.
The HardieTrim integration — transitions at every window, the corners, the roofline — is precise. No caulk bridging poor fits, no compression joints. Clean, tight, and clearly done by people who've installed this system many times.
Forge Siding provides Fiber Cement Siding across the full Columbus, OH service area. We're familiar with local building codes, permit requirements, and contractor licensing standards throughout OH — no learning curve on your project.
Serving zip codes including: 43109 43026 43054 43228 43220 43221 43222 43223 43224 43227 43213 43212 43215 43214 43217 43219 43218 43002 43004 43068 43081 43085 43240 43229 43235 43232 43231 43230 43119 43110 43017 43016 43137 43211 43210 43202 43203 43201 43206 43207 43204 43205 43209 43236 43251 43260 43266 43268 43270 43271 43272 43279 43287 43291
Our certified Columbus, OH fiber cement crews book fast. Call now to schedule your technical assessment and written estimate from a Preferred Contractor.
📞 Call Forge Siding Now